CSI-F-10 User manual - Hydac

GSM Radio Module CSI-F-10 Page 879.3.5 Division RemainderThe Division remainder function returns the division remainder (themodulo) of the two input values at the output. The division remainderis determined by performing a whole number division x 1 / x 2 andoutputting the remainder of this division as output value.If the input x 1 counts upward, e.g. sequentially by 1, and the input x 2is 5, then the output will count around from 0 to 4.Inputs: x 1 : (Numerical)x 2 : (Numerical)Outputs: y: (Numerical)Parameters: -9.3.6 Absolute ValueThe Absolute value function returns the input value without aplus/minus sign at the output:y = |x|Inputs: x: (Numerical)Outputs: y: (Numerical)Parameters: -9.3.7 Change of Algebraic SignThe Change of sign function returns the inverse input value at theoutput:y = -xInputs: x: (Numerical)Outputs: y: (Numerical)Parameters: -9.3.8 RoundingThe Rounding function returns the rounded input value at the output.With this function, it is possible not only to round to whole decimalplaces, but also to whole-number multiples of a step.The size of the step is specified in the Step parameter.If the step size is 20, for example, then all values between -10 and10 will be rounded off to 0, all values between 10 and 30 to 20, andso on.Inputs: x: (Numerical)Outputs: y: (Numerical)Parameters: p 1 : Step (Numerical)Status 2011/08/17 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752