CSI-F-10 User manual - Hydac

More documents

Recommendations

Info

GSM Radio Module CSI-F-10 Page 627.1.4.3 CM Program• ProgramCM Program / Byte [accumulator requirement display in CM program]CM Source text / Byte [accumulator requirement display in CM source text]Active[displays whether a CM program is active]"Back" takes you back to the main menu.• Numerical input valuesHere you can change the values of all the numerical input values used in theCM program.Click on "Apply", to apply the settings. "Back" takes you back to the mainmenu.• Boolean input valuesHere you can change the status of all the Boolean input values used in the CMprogram.Click on "Apply", to apply the settings. "Back" takes you back to the mainmenu.Status 2011/08/17 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
GSM Radio Module CSI-F-10 Page 637.1.5 Managing ConfigurationsHere you can generate and manage various configuration files. These configurationfiles can, for example, be generated in series on a "Master" device and then loadedon an unlimited number of other CSI-F-10.The following configuration files can be generated and managed:• Input values• Information• Permissions• Program• GSM• Date / TimeSelectiontarget folder- With Open you can display the contents of a configuration file listed in the lowerdisplay field. Highlight the required file with a mouse click. You can print out thefile in the window that opens automatically.- With Load you can transfer a configuration file (marked in the lower display field)from the PC to the CSI-F-10. The following message appears after thecompletion of the transfer:- When you press Save, you generate a new configuration file or save a modifiedone to the previously specified target folder.- Press Delete to delete the configuration file in the target folder highlighted in thelower display field.- Press Refresh to update the display field for the configuration files. The specifiedtarget folder will be selected again for this purpose.This is necessary, e.g. when you copy or delete configuration files usingWindows Explorer. These changes will not be displayed in the folder until after"Refresh" has been carried out in CMWIN.- With Display you can display the particular "Actual Configuration" currently in theconnected CSI-F-10.Status 2011/08/17 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
Page 1 and 2:
GSM Radio ModuleCSI-F-10User Manual
Page 3 and 4:
GSM Radio Module CSI-F-10 Page 3Tab
Page 5 and 6:
GSM Radio Module CSI-F-10 Page 59.2
Page 7 and 8:
GSM Radio Module CSI-F-10 Page 711.
Page 9 and 10:
GSM Radio Module CSI-F-10 Page 91 G
Page 11 and 12: GSM Radio Module CSI-F-10 Page 112
Page 17 and 18: GSM Radio Module CSI-F-10 Page 175.
Page 21 and 22: GSM Radio Module CSI-F-10 Page 21Co
Page 23 and 24: GSM Radio Module CSI-F-10 Page 23PI
Page 25 and 26: +U BGNDGSM Radio Module CSI-F-10 Pa
Page 61: GSM Radio Module CSI-F-10 Page 61
Page 113 and 114:
GSM Radio Module CSI-F-10 Page 1131
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
GSM Radio Module CSI-F-10 Page 119S
show all

CSI-F-10 User manual - Hydac

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?