CSI-F-10 User manual - Hydac

More documents

Recommendations

Info

GSM Radio Module CSI-F-10 Page 72• With "Perform cycle", you can start the simulation for a single processingcycle and view the resulting status modifications of the actions afterwards.• With "Start autom. cycle" you can start a permanent, continuous programsimulation. You can change the input values however you like during thesimulation and observe the status modifications of the actions.• With "End autom. cycle" you can stop the permanent, continuous programsimulation.• Click on "Close“ to take you back to the CM Editor.• During the simulation, the assigned input values and action statuses are alsodisplayed in the Linked Functions window by means of correspondingsymbols.Status 2011/08/17 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
GSM Radio Module CSI-F-10 Page 73• You can transfer the currently opened CM program to the CSI-F-10 with"Transfer into device“.Note!Only error-free programs can be transferred into the CSI-F-10.• The following message appears after the program has been successfullytransferred:• Here you can select whether you also wish to transfer the source code of theprogram into the CSI-F-10.Note!If the source code is also transferred into the CSI-F-10, then it is possible for itto be read again by every other connected PC and modified! If the sourcecode is not also transferred into the CSI-F-10, then the program cannot beuploaded by another PC.• The following message will appear if the CM program contains errors whenattempting transfer:• Eliminate the error(s) found in the CM program (see Chap. 8.2.2 "Function list“window and Chap. 10. "Error messages“) and transfer the program again.Note!If you transfer a program and a power failure occurs during the transfer, thenthe program will not be saved in the CSI-F-10 after power is restored. For thatreason, first save your program on the PC on which it was originally generatedor modified before making the transfer.Status 2011/08/17 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
Page 1 and 2:
GSM Radio ModuleCSI-F-10User Manual
Page 3 and 4:
GSM Radio Module CSI-F-10 Page 3Tab
Page 5 and 6:
GSM Radio Module CSI-F-10 Page 59.2
Page 7 and 8:
GSM Radio Module CSI-F-10 Page 711.
Page 9 and 10:
GSM Radio Module CSI-F-10 Page 91 G
Page 11 and 12:
GSM Radio Module CSI-F-10 Page 112
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22: GSM Radio Module CSI-F-10 Page 21Co
Page 23 and 24: GSM Radio Module CSI-F-10 Page 23PI
Page 25 and 26: +U BGNDGSM Radio Module CSI-F-10 Pa
Page 27 and 28: GSM Radio Module CSI-F-10 Page 27
Page 35 and 36: GSM Radio Module CSI-F-10 Page 356.
Page 71: GSM Radio Module CSI-F-10 Page 718.
Page 119 and 120: GSM Radio Module CSI-F-10 Page 119S
show all

CSI-F-10 User manual - Hydac

Create successful ePaper yourself

Delete template?

Save as template?