CSI-F-10 User manual - Hydac

More documents

Recommendations

Info

GSM Radio Module CSI-F-10 Page 768.1.5 Sensor constellationFor reliable system monitoring, ensure that exactly the same sensors that wereconnected at the time the CSI-F-10 was configured are connected during operation.The Sensor constellation is used for this purpose. The sensor constellation is amonitoring instrument for the connected sensor system, i.e. it continually compares theconnected "Actual" sensor system and the specified "Reference" sensor system.The sensor constellation is optional in the CSI-F-10 and not compulsory. If however asensor constellation has been saved, then the connected sensor system must match it.When there is an activated sensor constellation, then an "incorrect" sensor connectedby mistake will be recognized, thus preventing a situation in which the CM program isworking with incorrect information.A sensor constellation can be saved in files and loaded from files, and can be bothreceived and transferred by the CSI-F-10.The constellation files all have the extension *.hescf.The sensor constellation contains the following data:- Quantity of connected sensors- Quantity of subchannels for each connected sensor- Status of each individual subchannel (active/inactive)- Sensor class (analog / HSI / SMART)- Units of the individual measured values- Name of each sensor- Device designation of each sensorIf a sensor constellation is available in the CM Editor, then you can use the correctnames in connection with the measurements during program generation. It will then bethe case that only those sensors and subchannels that are actually present will beavailable and accessible for adjustment.A status message at the lower edge of the window of the CM Editor indicates whetheror not a sensor constellation is available.• With the function Apply from file, you can open a saved sensor constellationfile and use it in the CM Editor.To do this, enter the corresponding path and file name in the window that opensand then click on Open.• With the function Apply from device, you transfer one of the sensorconstellations stored in the CSI-F-10 to your PC, after which you can use it inthe CM Editor.Status 2011/08/17 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
GSM Radio Module CSI-F-10 Page 77• With Uninstall you delete the currently available sensor constellation in the CMEditor, after which it is no longer available for further use when generatingprograms.No saved constellation files are deleted!• To save a constellation file, select Saving to file. Enter the appropriate pathand required file name for this purpose in the window that opens.• When the Display function is selected, a window opens in which the completesensor constellation is displayed.Status 2011/08/17 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
Page 1 and 2:
GSM Radio ModuleCSI-F-10User Manual
Page 3 and 4:
GSM Radio Module CSI-F-10 Page 3Tab
Page 5 and 6:
GSM Radio Module CSI-F-10 Page 59.2
Page 7 and 8:
GSM Radio Module CSI-F-10 Page 711.
Page 9 and 10:
GSM Radio Module CSI-F-10 Page 91 G
Page 11 and 12:
GSM Radio Module CSI-F-10 Page 112
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
GSM Radio Module CSI-F-10 Page 21Co
Page 23 and 24:
GSM Radio Module CSI-F-10 Page 23PI
Page 25 and 26: +U BGNDGSM Radio Module CSI-F-10 Pa
Page 27 and 28: GSM Radio Module CSI-F-10 Page 27
Page 35 and 36: GSM Radio Module CSI-F-10 Page 356.
Page 75: GSM Radio Module CSI-F-10 Page 758.
Page 119 and 120: GSM Radio Module CSI-F-10 Page 119S
show all

CSI-F-10 User manual - Hydac

Create successful ePaper yourself

Delete template?

Save as template?