CSI-F-10 User manual - Hydac

More documents

Recommendations

Info

GSM Radio Module CSI-F-10 Page 647.1.6 Set bus addressThe Set bus address function is a general CMWIN function, but which cannot beused on a CSI-F-10 GSM radio module which is directly connected. A CSI-F-10directly connected to a PC generally has the address "Bus master", which cannotbe altered.Warning!If you try to change the bus address of the CSI-F-10, an error message appears.7.1.7 Managing sensor constellationsThe sensor constellation is a monitoring instrument for the connected sensorsystem, i.e. it continually compares the connected “Actual“ sensor system with thespecified “Target“ sensor system (see Chap. 8.1.5. Sensor constellation).You can use this function to generate and manage various sensor constellationfiles. These constellation files can, like the configuration files, be generated on a"Master" device and then loaded onto an unlimited number of other CSI-F-10.If no sensor constellation has yet been generated in the device then the followingwindow opens:• You can generate a new sensor constellation in the device by pressing Create(in the upper command bar). Afterwards, the following message appears:• Press Display (in the upper command bar) to display the actual sensorconstellation currently in the device.• Press Delete (in the upper command bar) to delete the actual sensorconstellation currently in the device.All other functions in the lower command bar (Open, Load, Save, Delete, etc.) andthe selection of the target folder for saving the files are identical with Chapter 7.1.5"Managing configurations".Status 2011/08/17 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
GSM Radio Module CSI-F-10 Page 657.1.8 Sending a text messageThe "Send text message“ serves mainly to test the GSM mobile radio connection.- In the Telephone number field, input the required number (this is independent of thetelephone numbers in Chap. 7.1.4.1 Permissions).- In the Message field, input the message text.• Click "Send" to send the message.• By clicking on "Check status" you can track the progress of the messagetransfer and check the connection.Warning!Text messages cannot be sent if the CSI-F-10 is being accessed via GSM connection.This function is only available with cable connection (e.g. connection via CSI-B-2,HMG 510, CMU 1000).Status 2011/08/17 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
Page 1 and 2:
GSM Radio ModuleCSI-F-10User Manual
Page 3 and 4:
GSM Radio Module CSI-F-10 Page 3Tab
Page 5 and 6:
GSM Radio Module CSI-F-10 Page 59.2
Page 7 and 8:
GSM Radio Module CSI-F-10 Page 711.
Page 9 and 10:
GSM Radio Module CSI-F-10 Page 91 G
Page 11 and 12:
GSM Radio Module CSI-F-10 Page 112
Page 13 and 14: GSM Radio Module CSI-F-10 Page 133
Page 17 and 18: GSM Radio Module CSI-F-10 Page 175.
Page 21 and 22: GSM Radio Module CSI-F-10 Page 21Co
Page 23 and 24: GSM Radio Module CSI-F-10 Page 23PI
Page 25 and 26: +U BGNDGSM Radio Module CSI-F-10 Pa
Page 63: GSM Radio Module CSI-F-10 Page 637.
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
GSM Radio Module CSI-F-10 Page 119S
show all

CSI-F-10 User manual - Hydac

Create successful ePaper yourself

Delete template?

Save as template?