CSI-F-10 User manual - Hydac

GSM Radio Module CSI-F-10 Page 165 Setup and FunctionThe GSM radio module CSI-F-10 is an electronic device with universal applications fortransmitting data and digital signals over the GSM mobile radio network.A maximum of two HYDAC SMART sensors with HSI interface (automatic sensorrecognition), e.g. HYDACLab ® , AS 1000 or CS 1000, can be connected to its inputconnections.5.1 Display elements / Connections4x LED red: 2x LED yellow: 2x LED green:reception strength user configuration status sensor recognitionGSM network via CM program GSM activityGSM antennaIn / Out socket:Dig. Input 1, 2, 3, 4Dig. Output 1, 2with supplyPower connection: Sensor 1: Sensor 2:voltage supply. AS 1000 / CS 1000HSI-Master HYDACLab ®HSI + supply HSI + supplyLED Color Condition MeaningHighredOnLowAll OffOnGSM green Rapid flashingSlow flashingOnStatus green FlashingOffSignal 1 yellow On / OffSignal 2 yellow On / Off4 LEDs: reception strength > 75 %3 LEDs: reception strength > 50 %2 LEDs: reception strength > 25 %1 LED: reception strength < 25 %No receptionNot registeredCommunicationRegisteredMin. 1 sensor recognisedPC connection activeNo sensor recognisedFunction according to CM program(programmable user application)In the initialization phase (approx. 10 sec.) the LEDs will not indicate any definedcondition.Status 2011/08/17 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752