CSI-F-10 User manual - Hydac

More documents

Recommendations

Info

GSM Radio Module CSI-F-10 Page 11010 Error Messages CM Program CompilationIn order to ensure as high a degree of operational safety as possible, the CM programgenerated will be checked for possible programming errors before it is transferred intothe device. If the system detects one or more such programming errors, then thefollowing message will appear and the CM program will not be transferred in theCSI-F-10.The menu function [CM Program / Display] (see Chap. 8.1.2) can be used in suchcases to have a more detailed program evaluation displayed, together with errormessages, and to have this printed out as needed.Work through all of the error messages in your CM program and then transfer theprogram once again into your CSI-F-10.The following list shows all of the error messages that could occur duringprogramming, together with the associated function groups present in CMWIN, andtheir causes.Status 2011/08/17 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
GSM Radio Module CSI-F-10 Page 11110.1 Overriding Error Messages10.1.1 Function not Available in this ModeThe CM program has been compiled for a platform in which the marked function doesnot exist.► Check the platform setting and correct it or modify the CM program accordingly.10.2 Error Messages with Data Sources10.2.1 Invalid Channel SettingA channel/subchannel has been selected that is not valid.► Check the channel setting and correct it.10.2.2 Duplicate Channel NameThe name of a channel may only be used once in a CM program.► Check the channel name and correct it.10.2.3 Invalid Digital InputA port must be set for the digital input function.► Check the port setting and correct it.10.2.4 Duplicate Digital InputA port must be set for the digital input function. This set port may only be used oncein a CM program.► Check the port setting and correct it.10.2.5 Too many Boolean Input FieldsA maximum of 50 Boolean input values are permitted to be present in a single CMprogram.► Reduce the Boolean input values to a maximum of 50.10.2.6 No Inscription for Boolean InputThe Boolean input value must have an inscription.► Enter an inscription in the function properties.10.2.7 Duplicate Inscription for Boolean InputsThe inscription of a Boolean input value must be unambiguous within a CM programand is only permitted to occur once for that reason.► Check the inscription and correct it.10.2.8 Too Many Numerical Input ValuesA maximum of 50 numerical input values are permitted to be present in a single CMprogram.► Reduce the numerical input values to a maximum of 50.Status 2011/08/17 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
Page 1 and 2:
GSM Radio ModuleCSI-F-10User Manual
Page 3 and 4:
GSM Radio Module CSI-F-10 Page 3Tab
Page 5 and 6:
GSM Radio Module CSI-F-10 Page 59.2
Page 7 and 8:
GSM Radio Module CSI-F-10 Page 711.
Page 9 and 10:
GSM Radio Module CSI-F-10 Page 91 G
Page 11 and 12:
GSM Radio Module CSI-F-10 Page 112
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
GSM Radio Module CSI-F-10 Page 21Co
Page 23 and 24:
GSM Radio Module CSI-F-10 Page 23PI
Page 25 and 26:
+U BGNDGSM Radio Module CSI-F-10 Pa
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60: GSM Radio Module CSI-F-10 Page 597.
Page 61 and 62: GSM Radio Module CSI-F-10 Page 61
Page 109: GSM Radio Module CSI-F-10 Page 1099
Page 119 and 120: GSM Radio Module CSI-F-10 Page 119S
show all

CSI-F-10 User manual - Hydac

Create successful ePaper yourself

Delete template?

Save as template?