CSI-F-10 User manual - Hydac

More documents

Recommendations

Info

GSM Radio Module CSI-F-10 Page 506.5.2.2 Connecting to the sensor by connection 1 (HSI address "a")• Select Address a and then Switch on. The following message appears• Confirm this with OK.• Click on Connect to establish a link with the sensor.• Click on Ok to continue with the connection setup or on Disconnect to cancelthe connection setup.Status 2011/08/17 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
GSM Radio Module CSI-F-10 Page 516.5.2.3 Connecting to the sensor by connection 2 (HSI address "b")• Select Address b and then Switch on. Afterwards the following messageappears:• Confirm this with OK.• Click on Connect to establish a link with the sensor.• Click on Ok continue with the connection setup or on Disconnect to cancel theconnection setup.Status 2011/08/17 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
Page 1 and 2: GSM Radio ModuleCSI-F-10User Manual
Page 3 and 4: GSM Radio Module CSI-F-10 Page 3Tab
Page 5 and 6: GSM Radio Module CSI-F-10 Page 59.2
Page 7 and 8: GSM Radio Module CSI-F-10 Page 711.
Page 9 and 10: GSM Radio Module CSI-F-10 Page 91 G
Page 11 and 12: GSM Radio Module CSI-F-10 Page 112
Page 21 and 22: GSM Radio Module CSI-F-10 Page 21Co
Page 23 and 24: GSM Radio Module CSI-F-10 Page 23PI
Page 25 and 26: +U BGNDGSM Radio Module CSI-F-10 Pa
Page 49: GSM Radio Module CSI-F-10 Page 49
Page 101 and 102:
GSM Radio Module CSI-F-10 Page 1019
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
GSM Radio Module CSI-F-10 Page 119S
show all

CSI-F-10 User manual - Hydac

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?