CSI-F-10 User manual - Hydac

GSM Radio Module CSI-F-10 Page 758.1.3 Grouping• With Create grouping you can join several functions to make an cohesive unitand move and copy these as a block.• First mark the functions to be grouped by enclosing them in a frame drawnwith the help of the cursor.• Afterwards, select “Group“ in the menu bar and then “Create grouping“ in thedrop-down menu that appears.• Click on Cancel grouping to ungroup the functions which were linked togetherin the group.• To do this, highlight the group concerned by clicking on any one of thefunctions within the group.• Afterwards, select “Group“ in the menu bar and then “Cancel grouping“ in thedrop-down menu that appears.8.1.4 DeviceThe "Connection“ function can be used to set up a connection between the PC and aCSI-F-10 from the CM Editor.The function is identical with the connection setup in the CM Manager. See Chap. 6.3.2ff.Status 2011/08/17 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752