Intel® Server System Server System "Emerald Ridge ... - CTL

IPMI Command InterfaceIntel® Server System "Emerald Ridge” Integrated Baseboard Management Controller EPSTable 65. Supported SMTP Configuration ParametersParameterParameterParameter DataNumberEnable/Disable SMTP* 0 Data 1 – Enable/Disable SMTP Support[7:1] – Reserved[0] – 1b = Enable SMTP, 0b = Disable SMTPSMTP Server Address* 1 Data 1:4 SMTP Server Address. MS-byte firstSMTP User Name * 2 User Name String in ASCII, 16 bytes max. Nameswith fewer than 16 bytes are terminated with a null(00h) character and 00h padded to the remainingbytes. When the User name is read back thosebytes shall be returned as 0. This field is used forAuthenticated SMTP.User Password *(Write only)Number of Destinations/SMTP Configurations*(Read Only)Email Address(Max number of blocks = 2)3 Password String in ASCII, 20 bytes max.Passwords with fewer than 16 bytes are terminatedwith a null (00h) character and 00h padded to theremaining bytes. This field is used forAuthenticated SMTP.4 Data 1: Number of Destinations supported for theSMTP .The Number must be at least one if theSMTP is supported.5 Sets the Email Address for the first Configurabledestination.Data 1:N : Email address String in ASCII ,64 bytesmax.Block size is 16 Bytes.We can set/get max of 16 bytes (i.e one block ) inEmail address at a time through Set/Get SMTPconfiguration.Email address with greater than 16 bytes needtwo-set/get SMTP configuration. First 16 bytes arestored in first block selector and remaining bytesare stored in next block.Email addresses with fewer than 16 bytes areterminated with a null (00h) character and 00h areimplicitly padded to the remaining bytes byfirmware and stored in first block. When the Emailaddress is read back those bytes shall be returnedas 0.Subject(Max number of blocks = 2)Message Content(Max number of blocks = 4)6 Get/Set the Subject of the mail.Data 1: N: E-mail subject string in ASCII, 32 bytesmax. Names with fewer than 32 bytes areterminated with a null (00h) character and 00hpadded to the remaining bytes. When the Username is read back those bytes shall be returned as0.Block size is 16 bytes.7 Configure/Get the mail content of the Configurabledestination.Data 1: N: Message Content String in ASCII,64 bytes max.Block size is 16 bytes.126Intel ConfidentialRevision 1.1