Intel® Server System Server System "Emerald Ridge ... - CTL

Intel® Server System "Emerald Ridge” Integrated Baseboard Management Controller EPSIPMI Command InterfaceSender Email Address *(Max no of Blocks = 4)SMTP Host name *(Max no of Blocks = 2)ParameterParameterParameter DataNumber8 Configure the sender e-mail addressData 1: N: E-mail address String in ASCII, 64 bytesmax.Block size is 16 Bytes.Address with greater than 16 bytes need more thanone set/get SMTP configuration.Names with fewer than 16 bytes are terminatedwith a null (00h) character and 00h padded to theremaining bytes. When the User name is read backthose bytes shall be returned as 0.9 Configure the SMTP host name.Data 1: N: E-mail address String in ASCII, 32 bytesmax.Block size is 16 bytesNames with fewer than 16 bytes are terminatedwith a null (00h) character and 00h padded to theremaining bytes. When the SMTP Host name isread back those padding bytes shall be returned as0.* Set selector is not applicable because these parameters are common for all Alert destinations.Both should be zero.Note: All SMTP alerts are sent to TCP port 25 on the destination machine.10.4 Completion CodesSome commands may implement other completion codes. These are defined in the IntelligentPlatform Management Interface Specification Second Generation v2.0, or if BMC specific, in thecommand tables above.Table 66. IPMI 2.0 Completion CodesCompletion Code00h08hC0hC1hC2hC3hC4hC5hC7hC8hC9hCAhCBhCChMeaningThe command was successfully completed.Used by RAS commands to indicate RAS sensor update is in progress.Node busy. The command could not be processed because command processing resources aretemporarily unavailable.Invalid command. Used to indicate an unrecognized or unsupported command.The command is invalid for the given LUN.Timeout while processing command. A response is not available.Out of space. The command could not be completed because of a lack of storage space requiredto execute the given command operation.The action was not performed due to a canceled or invalid reservation number.The command has the wrong number of data bytes.Too many data bytes for requested operation.One or more of the data bytes in a command is outside the range of valid values.Cannot return the number of requested data bytes.The request is for a nonexistent sensor in the BMCOne or more of the data bytes is an invalid value.Revision 1.1Intel ® Confidential 127