User Manual High Performance AC Drive

Programming and Parameters 3-89NameNo. DescriptionValues801 Anlg In1 ValueUnits: V/mADisplays the actual input value at Analog Input 1. Analog Input 1 may be configured for Default: 0V/4 mAvoltage or current input signal. For proper selection of the input signal, the DIP switch and Par Min/Max: -/+20.0000821 [Analog I/O Units] must be set to match.Type of Input: Configurable, Voltage or CurrentPolarity: Bi-PolarResolution: 14 bit (-8191 to +8191)LinkableRead-WriteData TypeRO RealDIP Switch Analog I/O UnitsAI 1 Voltage S5-2 = Open Par 821 Bit 0 = 0 (False)AI 1 Current S5-2 = Closed Par 821 Bit 0 = 1 (True)802 Anlg In1 ScaleUnits: /1vScales the range of Analog Input 1 to the range of Par 800 [Anlg In1 Data]. Par 801 [Anlg In1 Default: 0.0000Value] is multiplied by this number to produce the input to the lead lag filter function. Min/Max: -/+2200000000.0000Par 802 [Anlg In1 Scale] = 1 and Par 800 [Anlg In1 Data] = 10 when 10V is applied.803 Anlg In1 OffsetUnits: VoltApplies an offset to Analog Input 1. Use the offset to correct for zero signal errors or to create Default: 0.0000an offset to the actual input. The output of the A/D converter is summed with this parameter to Min/Max: -/+20.0000produce Par 801 [Anlg In1 Value].804 AI 1 Filt GainProvides the Lead term for the Analog Input 1 filter.805 Anlg In1 Filt BWProvides the Lag term for the Analog Input 1 filter.Light HeavyPar 804 [Al 1 Filt Gain] 0.25 0.1Par 805 [Anlg In1 Filt BW] 50 10806 Anlg In2 DataDisplays the scaled final value for Analog Input 2.Default: 1.0000Min/Max: -/+5.0000Units: R/SDefault: 0.0000Min/Max: 0.0000/3760.0000lDefault: 0.0000Min/Max: -/+2200000000.0000807 Anlg In2 ValueUnits: V/mADisplays the actual input value at Analog Input 2. Analog Input 2 may be configured for Default: 0V/4 mAvoltage or current input signal. For proper selection of the input signal, the DIP switch and Par Min/Max: -/+20.0000821 [Analog I/O Units] must be set to match.Type of Input: Configurable, Voltage or CurrentPolarity: Bi-PolarResolution: 14 bit (-8191 to +8191)✓✓✓✓RW RealRW RealRW RealRW RealRO RealRO RealDIP Switch Analog I/O UnitsAI 2 Voltage S5-1 = Open Par 821 Bit 1 = 0 (False)AI 2 Current S5-1 = Closed Par 821 Bit 1 = 1 (True)808 Anlg In2 ScaleUnits: /1vScales the range of Analog Input 2 to the range of Par 806 [Anlg In2 Data]. Par 807 [Anlg In2 Default: 0.0000Value] is multiplied by this number to produce the input to the lead lag filter function. Min/Max: -/+2200000000.0000809 Anlg In2 OffsetUnits: VoltApplies an offset to Analog Input 2. Use the offset to correct for zero signal errors or to create Default: 0.0000an offset to the actual input. The output of the A/D converter is summed with this parameter to Min/Max: -/+20.0000produce Par 807 [Anlg In2 Value].810 AI 2 Filt GainProvides the Lead term for the Analog Input 2 filter.811 Anlg In2 Filt BWSets the frequency for the Analog Input 2 filter.Light HeavyPar 810 [Al 2 Filt Gain 0.25 0.1Par 811 [Anlg In2 Filt BW] 50 10Default:Min/Max: 1.0000-/+5.0000Units: R/SDefault: 0.0000Min/Max: 0.0000/3760.0000✓✓✓✓RW RealRW RealRW RealRW Real812 Anlg In3 DataDisplays the scaled final value for Analog Input 3.Default: 0.0000Min/Max: -/+2200000000.0000RO Real