User Manual High Performance AC Drive

Installation/Wiring 1-3Mounting Clearances101.6mm(4.0 in.)No Adhesive Label(see below)With Adhesive Label(see below)50.8mm (2.0 in.)101.6mm(4.0 in.)101.6mm(4.0 in.)Refer to the PowerFlex 700S PhaseII Reference Manual, publicationPFLEX-RM003, for detaileddimension information.50.8mm (2.0 in.)101.6mm(4.0 in.)Operating TemperaturesPowerFlex 700S drives are designed to operate in surrounding airtemperature of 0° to 40° C. To operate the drive in installations withsurrounding air temperature between 41° and 50° C, remove the adhesivelabel affixed to the top of the drive enclosure.Table 1.A Acceptable Surrounding Air Temperature & Required ActionsRequired Action . . .IP 20, NEMA IP 20, NEMA Type IP 00, NEMAType 1OpenType OpenNo Action Required Remove Top Label Remove Top Label &Drive Catalog NumberVent Plate (1) (2)All Except 20DC072 40° C 50° C NA20DC072 40° C 45° C 50° C(1) To remove vent plate (see page A-27 for location), lift top edge of plate from the chassis. Rotate the plate outfrom the back plate.(2)Frame 9 & up Only.Important: Removing the adhesive label from the drive changes the NEMAenclosure rating from Type 1 to Open type.