User Manual High Performance AC Drive

4-2 TroubleshootingLED IndicationsFigure 4.1 Drive Status Indicators➊➋➌➊➋➌DRIVEPower StructureControl AssemblyCommunicationsTable 4.B Drive Status Indicators# Name Color State Description Action➊ PWR Green Steady Illuminates when power is applied to the drive. No action - no faults present(Power)➋Green Flashing Drive ready, but not running & no faults are No action - no faults presentSTS (Status)present.Steady Drive running, no faults are present. No action - no faults presentYellow Flashing A type 2 (non-configurable) alarm condition A start inhibit exists. Refer to Par 156 [Startexists, drive continues to run.Inhibits]Steady A type 1 (user configurable) alarm conditionexists, but drive continues to run.Red Flashing A fault has occurred. Refer to Table Table 4.D for faults.Steady A non-resettable fault has occurred.➌PORTMODNET ANET BRed /YellowFlashingAlternatelyRefer to theCommunicationAdapter UserManualThe drive is in flash recovery mode. The onlyoperation permitted is flash upgrade.Status of DPI port internal communications (ifpresent).Status of communications module (wheninstalled).Status of network (if connected).Status of secondary network (if connected).Complete Flash Upgrade