User Manual High Performance AC Drive

Chapter 3Programming and ParametersChapter 3 provides a complete listing and description of the PowerFlex ®700S parameters. The parameters can be programmed (viewed/edited) usinga HIM (Human Interface Module). Refer to HIM Overview on page D-1 forinformation on using the HIM to view and edit parameters. As analternative, programming can also be performed using DriveToolssoftware and a personal computer.For information on...See pageAbout Parameters 3-1How Parameters are Organized 3-3Parameter Data in Linear List Format 3-15Parameter Cross Reference By Name 3-109About ParametersTo configure a Drive module to operate in a specific way, drive parametersmay have to be set. Three types of parameters exist:• ENUM ParametersThese parameters allow a selection from 2 or more items. The LCDHIM will display a text message for each item.• Bit ParametersThese parameters have individual bits associated with features orconditions. If the bit is 0, the feature is off or the condition is false. Ifthe bit is 1, the feature is on or the condition is true.• Numeric ParametersThese parameters have a single numeric value (i.e. 0.1 Volts).The example on the following page shows how each parameter type ispresented in this manual.