User Manual High Performance AC Drive

Chapter 1Installation/WiringChapter ObjectivesThis chapter provides the information needed to mount and wirePowerFlex ® 700S AC drives, frames 1 - 6. For installation instructions forPowerFlex 700S AC drives frames 9 - 12, refer to publicationPFLEX-IN006.For Information on …See Page...Opening the Cover 1-2Mounting Clearances 1-3AC Supply Source Considerations 1-4Grounding Requirements 1-5Fuses and Circuit Breakers 1-6Power Wiring 1-7Using Input/Output Contactors 1-17Using PowerFlex® 700S Drives with Regenerative Power Units 1-17Disconnecting MOVs and Common Mode Capacitors 1-18I/O Wiring 1-21CE Conformity 1-29Since most start-up difficulties are the result of incorrect wiring, take everyprecaution to assure the wiring is correct. Read and understand all items inthis chapter before beginning installation.!ATTENTION: The following information is merely a guide forproper installation. The Allen-Bradley Company cannot assumeresponsibility for the compliance or the noncompliance to anycode, national, local or otherwise for the proper installation of thisdrive or associated equipment. A hazard of personal injury and/orequipment damage exists if codes are ignored during installation.