AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 1: AutoCAD Basics
Click Annotate > Dimensions > Continue > Baseline on the
ribbon.
Select the base dimension.
Select the third and fourth point of the baseline dimension. Next,
right-click and select Enter.
Angular DAN It creates an angular dimension.
Click Annotate > Dimensions > Dimension drop-down > Angle
on the ribbon.
Select the first line and second line.
Move the pointer and position the angle dimension.
To create an angle dimension on an arc, select the arc and
position the dimension.
To create an angle dimension on a circle, select two points on the
circle and position the angle dimension.
131