AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 1: AutoCAD Basics
Press Esc to deactivate the Copy command.
On the ribbon, click Home > Modify >
Mirror, and then select the door and swing
of the bathroom. Press Enter to accept the
selection.
Select the door and door swing.
Click the right mouse button and select
Copy Selection.
Select the corner point of the rectangle as
base point.
Define the mirror line by selecting the
points, as shown below.
Select the corner points of openings, as
shown below.
Select Yes from the command line. This
deletes the original object.
On the ribbon, click Home > Modify >
Scale, and then select the door & swing at
the main entrance. Press Enter.
Select the base point, as shown below.
292