AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 2: Autodesk Inventor Basics
You can set the order in which the bends will be
annotation.
4. Click the Origin YZ Plane button on the
dialog
5. Click OK to mirror the feature.
6. Create a corner seam between the mirrored
counter flange and flange.
2. Click the Bend Order Annotation button on the
Manage panel of the Flat Pattern tab. The order
in which the bends will be annotated is
displayed.
Creating the Flat Pattern
1. To create a flat pattern, click Sheet Metal > Flat
Pattern > Flat Pattern on the ribbon.
450