AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 2: Autodesk Inventor Basics
5. Start a sketch on the YZ Plane.
6. Click the Slice Graphics icon at the bottom of
the graphics window.
7. Draw two concentric circles and dimension
them.
10. On the Extrude dialog, select Extents >
Between.
11. Click on the tubes on both sides of the sketch.
12. On the Extrude dialog, uncheck the Check to
terminate feature on the extended face options.
8. Click Finish Sketch.
9. Activate the Extrude tool and click in the outer
loop of the sketch.
This will avoid the extruded feature from
terminating on the extended portion of the
selected surface.
13. Click OK to extrude the sketch.
411