AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 2: Autodesk Inventor Basics
41. Click Finish Sketch.
Creating the second section
1. Click 3D Model > Work Features > Plane >
Offset from Plane on the ribbon.
4. Click OK .
5. On the ribbon, click the 3D Model > Sketch >
Start 2D Sketch.
6. Select the newly created datum plane.
7. Right click and select Center Point Circle from
the Marking Menu.
8. Select the origin point, move the cursor outside,
and click to create a circle.
9. Right click and select OK.
10. Right click and select General Dimension from
the Marking Menu.
11. Select the circle, move the cursor outward, and
click.
12. Type 1.574 and press Enter.
2. Select the XZ plane from the Browser window.
13. Click Finish Sketch on the ribbon.
Creating the Loft feature
1. To create a loft feature, click 3D Model > Create
> Loft on the ribbon; the Loft dialog appears.
2. Select the Rails option from the dialog.
3. Enter 8.858 in the Distance box.
397