AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 2: Autodesk Inventor Basics
Annotation Scale drop-down available on the
Manage panel of the Annotate ribbon tab.
Adding Tolerances to the Model
dimensions
1. In the Browser Window, right click on the
Extrusion 1 feature, and then select Show
Dimensions.
6. Click OK on the dialog.
7. Click the green check on the Edit Dimension
box.
8. Likewise, add tolerances to the remaining
dimensions, as shown.
The dimensions of the feature are displayed.
9. Right click on the Extrusion2 feature, and then
select Edit Sketch.
10. Add tolerances to the dimensions, as shown.
2. Double click on the 13.386 dimension.
3. On the Edit Dimension dialog, click the arrow
button pointing towards right, and then select
Tolerance.
4. On the Tolerance dialog, select Type >
Symmetric.
5. Type 0.002 in the Upper limit box.
489