AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 1: AutoCAD Basics
Exercise 2
In this exercise, you need create the drawing as
shown below and apply geometric and dimensional
constraints to it. Also, create relations between
dimensions in the Parameter Manager.
To modify the size of the drawing, change
the value of dia1 in the Parameters Manager
window; you will notice that all the values
will be changed, automatically.
Save and close the file.
Exercise 1
In this exercise, you need to create the drawing
shown in figure and apply geometric and
dimensional constraints to it.
172