AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 1: AutoCAD Basics
Click to create a horizontal line. You will
notice that the horizontal line is of same
length.
Click the right mouse button and select
Close.
On the Navigation Bar, click Zoom > Zoom
Window.
Create a window on the top left corner of
the drawing. The corner portion will be
zoomed in.
On the ribbon, click Home > Modify >
Offset.
Type-in 6 as offset distance and press Enter.
Select the left vertical line of the drawing.
Move the pointer inside the drawing and
click to create an offset line.
Likewise, offset the other lines, as shown
below.
On the ribbon, click Home > Modify >
Fillet.
Select the Radius option on the command
line, and then type-in 0. Press Enter.
Select the inner offset lines, as shown below.
286