AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 2: Autodesk Inventor Basics
Note that you need the reverse the direction of
revolution.
34. Click Finish Sketch.
35. Activate the Revolve tool and click on the
vertical line of the sketch.
36. On the dialog, select Extents > Angle, and then
type-in 100 in the Angle1 box.
37. Click the Direction 1 button.
40. Save the model.
TUTORIAL 5
In this tutorial, you create a chair, as shown.
38. Click OK.
Creating a 3D Sketch
1. Open a new Inventor file using the Standard.ipt
template (See Chapter 2, Tutorial 3, Starting a
New Part File section).
2. Click the Home icon located above the
ViewCube. This changes the view orientation to
Home.
39. Likewise, blend the other end of the thread.
3. On the ribbon, click 3D Model > Sketch > Start
405