AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 1: AutoCAD Basics
You can also insert blocks by activating the Insert
dialog.
Save the file as Electronic Symbols.dwg.
Close the file.
Open a new drawing file.
Set the maximum limit of the drawing to
100,100. Click Zoom All on the Navigation
Bar.
Click View > Palettes > DesignCenter on
the ribbon; the DesignCenter palette
appears.
In the DesignCenter palette, browse to the
Use the Move and Rotate tools and arrange
the blocks, as shown below.
location of the Electronic Symbols.dwg file
using the Folder List. Select the file and
double-click on the Blocks icon; all the
blocks present in the file will be displayed.
Drag and place the blocks in the graphics
window.
Close the DesignCenter palette.
Use the Line tool and complete the drawing,
as shown below.
193