AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 2: Autodesk Inventor Basics
42. Click OK to create the hole.
43. Create a circular pattern of the hole (See Chapter
5, Tutorial 1, Create a Circular Pattern).
6. Click Sketch > Start 2D Sketch on the ribbon.
7. Select top face of the Base.
44. Click the Return button on the ribbon.
8. On the ribbon, click Sketch > Create > Project
Geometry and select the circular edges of the
Base.
Creating the Second Component of the
Assembly
1. Click Assemble > Component > Create on
the ribbon; the Create In-Place Component
dialog appears.
2. Enter Spacer in the New Component name
field.
3. Check Constrain sketch plane to selected face
or plane option.
4. Click OK.
5. Select the top face of the Base.
9. Draw a circle of 4.5 in diameter.
457