AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 1: AutoCAD Basics
Click on anyone of the edges of the table;
you will notice that grips are displayed on it.
You can edit the table using these grips.
Ensure that the Table style is set to Part
List.
Click and drag the square grip below the
MATERIAL cell; the width of the cell will be
changed.
Under the Set cell Styles group, set the First
row cell style to Header.
Set the Second row cell style and All other
Click and drag the triangular grip located at
row cell styles to Data.
the bottom left corner of the table; the height
of the rows will be increased uniformly.
Set the number of Columns to 4 and
Column width to 65.
Set the Data rows and Row height to 2 and
1, respectively.
Click OK and place the table at the lower
right corner of the graphics window.
Enter PART No., NAME, MATERIAL, QTY
in the first row of the Part list table. Use the
TAB key to navigate between the cells.
Click in the second cell of the first column;
the Table Cell ribbon appears. You can use
this ribbon to modify the properties of the
table cell.
Click the Insert Below button on the Rows
panel; a new row will be added to the cell.
Click in the top left corner cell of the table.
Press and hold the SHIFT key and click in
the lower right corner of the table; all the
Click Close Text Editor button on the
cells in the table will be selected.
ribbon.
207