AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 1: AutoCAD Basics
In the Drafting Standard dialog, set the
Projection type to Third angle.
Select the Entire model option from the
command line; the model in the model space
will be selected and the message, “Enter
new or existing layout name to make
current or [?] :” appears in the
command line.
Press ENTER to select Layout 1; the base
view will be attached to the pointer and the
message, “Specify location of base view or
[Type/sElect/Orientation/Hidden
lines/Scale/Visibility] :” appears in
the command line. Also, the Drawing View
Examine the other options in the dialog, as
they are self-explanatory.
Click the OK button.
Creation tab appears in the ribbon.
Specify the location of the view in the paper
space, as shown below.
Creating a Base View
Base view will be the first view of the drawing. It
can be any view (front, top, right, left, bottom, back)
of the model. But commonly, the front or top views
of the model are generated first.
Open the Example 3.dwg, if it is not already
opened.
To generate the base view of the model,
click Home > View > Base > From Model
Space on the ribbon; the message, “Select
In the Drawing View Creation tab, set the
Orientation to Front.
Select the Visible Lines option from the
Hidden Lines drop-down.
objects or [Entire model] :”
appears in the command line.
277