AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 2: Autodesk Inventor Basics
6. Type-in 3 in the Distance box and press Enter.
4. Type-in 6 in the Polygon dialog.
Creating the second feature
1. Start a sketch on the YZ Plane.
5. Move the pointer vertically upward. You will
notice that a dotted trace line appears between
the origin point and the pointer.
2. On the ribbon, click Sketch > Create >
Rectangle drop-down > Polygon.
3. Click the sketch origin.
6. Click to create the polygon.
7. Click Done on the dialog.
8. On the ribbon, click the Sketch > Format >
Construction .
9. Activate the Line tool and select the vertices of
the polygon.
417