AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 1: AutoCAD Basics
pointer diagonally toward right and click to
specify the second corner.
Example 5
In this example, you will create a rectangle with
rounded corners.
Click Home > Draw > Rectangle on the
ribbon, or enter RECTANG or REC in the
command line.
Follow the prompt sequence given next:
Click Home > Draw > Rectangle on the
ribbon, or enter RECTANG or REC in the
command line.
Specify the first corner of the rectangle by
picking an arbitrary point.
Specify first corner point or
Follow the prompt sequence given next:
[Chamfer/Elevation/Fillet/Thickness/Width
]: Select the Fillet option from the command
line.
Specify fillet radius for rectangles: Type 50
and press ENTER.
Specify first corner point or
[Chamfer/Elevation/Fillet/Thickness/Width
]: Click at an arbitrary point in the graphics
window to specify the first corner.
Specify other corner point or
[Area/Dimensions/Rotation]: Move the
pointer diagonally toward right and click to
specify the second corner.
Specify other corner point or
[Area/Dimensions/Rotation]: Select the
Rotation option from the command line.
Specify rotation angle or [Pick points]:
Type 60 and press ENTER.
Specify other corner point or
[Area/Dimensions/Rotation]: Select the
Dimensions option from the command line.
Specify length for rectangles: Type 400 and
press ENTER.
Specify width for rectangles: Type 300 and
press ENTER.
Example 6
In this example, you will create an inclined
rectangle.
Drawing Polygons
A Polygon is a single object having many sides
ranging from 3 to 1024. In AutoCAD, you can create
regular polygons having sides with equal length.
There are two methods to create a polygon. These
59