AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 2: Autodesk Inventor Basics
Adding additional dimensions
1. To add dimensions, click Annotate >
Dimension > Dimension on the ribbon.
4. Place the dimension, as shown in figure. The
Edit Dimension dialog appears.
2. Select the center hole on the base view.
5. Click OK.
6. Create the dimensions on the detail view, as
shown in figure.
3. Right-click and select Dimension Type >
Diameter.
Populating the Title Block
1. To populate the title block, click File Menu >
iProperties.
370