AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 2: Autodesk Inventor Basics
21. Place the angular dimension of the slot; the Edit
Dimension box appears.
22. Enter 30 in the Edit Dimension box and click the
green check.
26. Click the Symmetric button on the
Constrain panel.
27. Select the end caps of the slot.
28. Select the construction line; the slot is made
symmetric about the construction line.
29. Apply other dimensions to the slot.
23. Click the Construction button on the Format
panel.
24. Click the Line button on the Create panel.
25. Draw a horizontal line passing through the
origin.
381