AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 1: AutoCAD Basics
Use the dimensioning tools and apply
Type 150 as the oblique angle and press
dimensions to the sketch.
ENTER; the dimensions are oblique as
shown below.
Expand the Dimensions panel on the
Annotate ribbon tab and click the Oblique
button.
Again, click the Oblique tool on the
Dimensions panel and select the aligned
dimensions. Next, right-click to accept.
Select the vertical dimensions and right-click
to accept; the message, “Enter obliquing
angle” appears in the command line.
Type 90 as the oblique angle and press
ENTER; the dimensions will be oblique as
shown below.
153