AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 1: AutoCAD Basics
Press Enter to accept 0 as the angle of
rotation.
Defining Attributes
An attribute is a line of text attached to a block. It
may contain any type of information related to a
block. For example, the following image shows a
Compressor symbol with an equipment tag. The
procedure to create an attribute is discussed in the
following example.
Click Insert > Block Definition > Define
Attributes on the ribbon; the Attribute
Definition dialog appears.
Example 1:
Open a new drawing file.
Create the symbols, as shown below.
The options in the Mode group of the Attribute
Definition dialog define the display mode of the
attribute. If you check the Invisible option, the
attribute will be invisible. The Constant option
makes the value of the attribute constant. You
cannot change the value. The Verify option prompts
you to verify after you enter a value. The Preset
199