AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 2: Autodesk Inventor Basics
Mirroring the fillet
9. Click the Mirror button on the Pattern panel;
the Mirror dialog appears.
10. Select the variable radius fillet from the model.
11. Click the Mirror Plane button on the dialog.
12. Select the XY Plane from the Browser window.
13. Click OK to mirror the fillet.
4. Click OK.
Creating the Boss Features
1. Click 3D Model > Sketch > Start 2D Sketch on
the ribbon and select the bottom face of the
model.
Shelling the Model
1. Click the Shell button on the Modify panel;
the Shell dialog appears.
2. Activate Construction button on the Format
panel.
3. On the ribbon, click Sketch > Create >
Rectangle drop-down > Rectangle Two Point
Center.
2. Click the Inside button on the dialog and set
the Thickness to 0.2 in.
3. Rotate the model and select the bottom face.
427