AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 2: Autodesk Inventor Basics
4. Click 3D Model > Sketch > Start 2D Sketch on
the ribbon.
5. Select the mid plane.
6. Click the Slice Graphics button at the bottom of
the window.
9. Finish the sketch.
10. Click 3D Model > Create > Rib on the
ribbon; the Rib dialog appears.
11. Select the sketch.
12. Click the Parallel to Sketch Plane button
on the dialog.
7. Click Sketch > Create > Project Geometry >
Project Cut Edges on the ribbon; the edges cut
by the sketch plane are projected.
13. Click the Direction 1 button.
14. Set Thickness to 0.197.
15. Click the To Next button.
16. Click the Symmetric button below the
Thickness box.
17. Click OK to create the rib feature.
8. Draw the sketch, as shown below.
18. To hide the midplane, select it and right-click.
391