AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 1: AutoCAD Basics
Click Home > Draw > Polyline on the
ribbon and draw a polyline, as shown
below.
Using the Write Block tool
Using the Write Block tool, you can create a
drawing file from a block or objects. You can later
insert this drawing file as a block into another
drawing. The procedure to create a drawing file
using blocks is discussed in the following example.
Example:
Click Close Block Editor on the Close panel.
Start a new drawing file and create two
blocks, as shown below. You can also
download them from the companion
website.
In the Block – Changes Not Saved dialog,
click Save the changes to Pump.
Insert the blocks and create the drawing, as
shown below.
All the instances of the block will be updated
automatically.
197