AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 2: Autodesk Inventor Basics
10. Click Sketch > Start 2D Sketch on the ribbon.
11. Select XZ Plane.
12. Create a sketch as shown below.
31. Click Finish Sketch
32. Extrude the sketch up to 3.75 in distance.
28. Click Finish Sketch.
29. Click 3D Model > Create > Extrude on the
ribbon and extrude the sketch up to 1.5 in.
33. Create a counterbore hole on the second feature
(See Chapter 5, Tutorial 1, Create a Counterbore
Hole section). The following figure shows the
dimensions of the counterbore hole.
30. Start a sketch on the top face and draw a circle
of 2 in diameter.
455