AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 1: AutoCAD Basics
door & swing at the entrance. Press Enter to
accept the selection.
Define the mirror line by selecting the
points, as shown below.
Select the Reference option from the
command line.
Select the two endpoints, as shown below.
This defines the reference length of the
objects. Now, you need to define the length
Select No from the command line. This
keeps the original object.
Copy the door & swing of the bathroom and
place at the opening, as shown below.
up to which you want to scale the objects.
Press Esc.
Type-in 36 and press Enter. The objects will
be scaled.
On the ribbon, click Home > Modify >
Rotate, and then select the copied object.
Rotate the objects by selecting the base point
and typing 90 as the rotation angle.
Activate the Mirror command and select the
293