AutoCAD 2018 and Inventor 2018 Tutorial By Tutorial Books (www.engbookspdf.com)

Part 1: AutoCAD Basics
Click Zoom > Zoom Window on the
Navigation Bar.
Specify the first point of the zoom window,
as shown.
Move the pointer diagonally toward right,
and then specify the second point, as shown.
The area inside the window will be
magnified.
Zooming with the Mouse Wheel
Zooming using the mouse wheel is one of the easiest
methods.
Roll the mouse wheel forward to zoom into
a drawing.
Roll the mouse wheel backwards to zoom
out of the drawing.
Press the mouse wheel and drag the mouse
to pan the drawing.
Using Zoom Extents
Using the Zoom Extents tool, you can zoom to the
extents of the largest object in a drawing.
Click Zoom Extents on the Navigation Bar.
You can also double-click on the mouse
wheel to zoom to extents.
Using Zoom-Window
Using the Zoom-Window tool, you can define the
area to be magnified by selecting two points
representing a rectangle.
Using Zoom-Previous
After magnifying a small area of the drawing, you
can use the Zoom-Previous tool to return to the
previous display.
Click Zoom > Zoom Previous on the
Navigation Bar.
Using Zoom-Realtime
Using the Zoom-Realtime tool, you can zoom in or
zoom out of a drawing dynamically.
76