eWON Family - eWON Support

General Reference Guide eWON Configuration
note: Unused parameters are hidden. You must check the Enabled checkbox to expand the parameters
Figure 25: Modem settings for eWON with GSM/GPRS modem (all parameters)
GPRS Settings
In order to generate a GPRS outgoing communication, the user must choose "GPRS" in the Connection type field from the Outgoing Calls
config part from the Dial Up Configuration page, see chapter “Primary & secondary servers” on page 40.
Notes:
• Each part of the GPRS configuration can be enabled or not.
• If your GPRS provider requires authentication when login in the GPRS network, the login and password must be entered in the Dial
Up Configuration page, see chapter “Primary & secondary servers” on page 40.
• Some network operators use authentication to identify the mobile phone connecting to their GPRS network.
PDP context definition
Access Point Name (APN)
Packet Data Protocol Context
Must be enabled in order to use GPRS connection.
Enter the Internet address of your access point.
Contact your GSM service provider to know your APN.
Table 20: eWON GPRS main settings controls
RG-001-0-EN ver 1.6 eWON® - 22/06/2009 - ©ACT'L sa Page 29