eWON Family - eWON Support
eWON Family - eWON Support
eWON Family - eWON Support
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3.3.4.1.1.3 Modem configuration (ISDN)<br />
General Reference Guide <strong>eWON</strong> Configuration<br />
Quality Of Service Profile (Requested)<br />
Check with your network operator before changing any of the QoS (Quality of Service) settings.<br />
The settings Precedence, Delay, Peak rate, Reliability and Mean Rate are all set by default to "Subscribed", which means that your operators<br />
default QoS (Quality of Service) values will be applied.<br />
precedence a numeric parameter which specifies the precedence class<br />
delay a numeric parameter which specifies the delay class<br />
reliability a numeric parameter which specifies the reliability class.<br />
peak a numeric parameter which specifies the peak throughput class<br />
mean a numeric parameter which specifies the mean throughput class<br />
Quality Of Service Profile (Minimum Acceptable)<br />
precedence a numeric parameter which specifies the precedence class<br />
delay a numeric parameter which specifies the delay class<br />
reliability a numeric parameter which specifies the reliability class.<br />
peak a numeric parameter which specifies the peak throughput class<br />
mean a numeric parameter which specifies the mean throughput class<br />
Table 21: <strong>eWON</strong> GPRS quality of services (QOS) settings controls<br />
Figure 26: Modem settings for <strong>eWON</strong> with ISDN modem<br />
Control Description<br />
Modem Detected<br />
Modem Init String (Basic Part)<br />
Multiple Subscriber Number (MSN)<br />
Textual description of the <strong>eWON</strong> internal modem detected, if available.<br />
The displayed text is always "Internal ISDN".<br />
This string is used to configure and to initialize the modem.<br />
Any change in this string could prevent communications to succeed, for that reason only<br />
qualified users should modify this string.<br />
Clearing this string will result to applying a well known default initialization string (after you<br />
have validated your choice by clicking on the Update button.<br />
Use this field to encode the phone number which you want the <strong>eWON</strong> answer.<br />
Leave the field empty (default) to answer all the phone numbers of this ISDN line.<br />
Table 22: <strong>eWON</strong> ISDN settings controls<br />
RG-001-0-EN ver 1.6 <strong>eWON</strong>® - 22/06/2009 - ©ACT'L sa Page 30