Passport® - Mindray

Appendix Electromagnetic Capability
Voltage Dips and Short Interruptions
Complies with the requirements of IEC 61000-4-11: 2001 for voltage dips and short
interruptions, namely, 0 V for 0.5 cycle, 40% of V for 5 cycles, 70% of V for 25 cycles 0V for
0.5 cycles.
Harmonic Current
Complies with the requirements of EN 61000-3-2:2005 Class A.
Voltage Fluctuations and Flicker
Complies with the requirements of EN 61000-3-3:2005.
19.15.2 Passport V
The Passport V meets the requirements of IEC 60601-1-2/EN 60601-1-2.
NOTE: The Passport V needs special precautions regarding EMC
and needs to be installed and put into service according to
the EMC information provided below.
NOTE: Portable and mobile RF communications equipment can
affect the Passport V. See tables 19-1 through 19-4 that
follow.
TABLE 19-1
GUIDANCE AND DECLARATION - ELECTROMAGNETIC EMISSIONS
The Passport V is intended for use in the electromagnetic environment specified below. The
customer or the user of the Passport V should assure that it is used in such an environment.
EMISSIONS
TEST COMPLIANCE ELECTROMAGNETIC ENVIRONMENT - GUIDANCE
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic
emissions IEC
61000-3-2
Voltage
fluctuations/
Flicker
emissions IEC
61000-3-3
Group 1 The Passport V uses RF energy only for its internal
function. Therefore, its RF emissions are very low and are
not likely to cause any interference in nearby electronic
equipment.
Class A The Passport V is suitable for use in all establishments
other than domestic establishments and those directly
connected to the public low-voltage power supply
Class A
network that supplies buildings used for domestic
purposes
Complies
Passport V Operating Instructions 0070-10-0704-02 19 - 35