Passport® - Mindray

General Product Description Display
2. Main Menus
The Main Menus of the Passport V are always displayed in the upper area of the screen
and are accessed using the Navigator Knob. The Main Menu headings are Patient,
Monitor Setup, Print Setup, Parameters, and Functions. These menus enable the
user to enter patient specific data, customize the monitor, setup printing or transfer patient
data.
The Functions Menu provides the following choices: Normal Screen, Remote View,
Drug Calculator, Copy Patient Data to Storage Device, Copy Patient Data
from Storage Device, and System Information.
The Normal Screen selection returns the view to the normal screen.
There are two options for data transfer. Copy patient data to Storage Device and
Copy patient data from Storage Device options allow for the transfer of patient
specific data from monitor to monitor.
3. Parameter Menus
The Parameter Menus enable the user to review and customize various parameter display
and alarm attributes. Use the Navigator Knob to access these menus. Parameters supported
include: ECG, ST, ART, CVP, SpO2 , NIBP, Resp, CO2 (optional), and Gas (optional).
4. Numeric Tiles
The numeric tiles display digital data for each available parameter.
5. Status Icon Area
Battery Status Icon:
When batteries are installed and the monitor is functioning on battery power, the battery
indicator provides a visual reference for the approximate charge level of the batteries. See
the following examples.
Full Battery Low Battery No Battery Present
When the battery charge is low, but not below the cutoff voltage, a flashing low battery icon
is displayed and a special low battery sound is activated.
WARNING: To ensure that alarms can sound if the Gas Module/Passport
V loses power, at least one charged battery must be
installed in the Passport V at all times.
NOTE: At least 15 minutes is available to turn off the monitor or
insert a new battery after the low battery alarm occurs.
Passport V Operating Instructions 0070-10-0704-02 1 - 9