Passport® - Mindray

System Configuration Installation Menu
MENU TITLE
ON SCREEN MENU CHOICES DEFAULT COMMENTS
Notch Filter 50 Hz
60 Hz
Off
ESU Filter Auto
Disable
SpO 2 Sensor Off
Audio
Off
Once
Repeat
SpO 2 Tones Standard Tones
Alternate Tones
Enable Arrhythmia All
Off Selection
Yes
No
Apnea Latch On
Off
Enable Silence All
Permanent Selection
Yes
No
Auxiliary Output Nurse call
Analog Output
Defib Sync
Nurse Call Mode Normally Open
Normally Close
Set up Serial Port 1 None
DIAP
Gas Module
Set up Serial Port 2 None
DIAP
Gas Module
Copy Monitor Defaults
to Storage Device
Copy Monitor Defaults
from Storage Device
Re-boot in demo mode No
Yes
Restore factory
defaults
Advanced Installation
Setup
60 Hz Select to change notch filter
for ECG.
Auto Select to change the ESU
filter.
Off Select to change the SpO 2
Sensor Off Audio alert
type.
Standard Tones Select to change the SpO 2
tones.
No Select to enable or disable
the Arrhythmia All Off
menu selection.
On Select to turn apnea alarm
latching on or off.
No Select to enable or disable
the Permanent Audio Off
menu selection.
Nurse Call Select to change the
function of the Auxiliary
Output interface.
Normally Open Select to change the type
of Nurse Call system
None Select to set up comm port.
None Select to set up comm port.
Select to copy monitor
defaults to Storage Device.
Select to copy monitor
defaults from Storage
Device.
No Set to “YES” to start the
monitor in demonstration
mode on next power-up.
Normal monitoring will
resume after cycling power
in demonstration mode.
Select to restore factory
defaults
Select to access Advanced
Installation Setup Menu.
Change Password Select to change
password.
Options Select to add/view
options.
Passport V Operating Instructions 0070-10-0704-02 2 - 3