Final Report Lot 9: Public street lighting - Amper

Table 86: Life Cycle Impact, Base Case, Category M (per 1000 functional lumen)
8
9
TOTAL (per 1000 functional lm)
Other Resources & Waste
169
WEIGHTED
AVERAGE
HPM HPS
Total Energy (GER) MJ 80.877 166.464 51.750
of which, electricity (in primary MJ) MJ 80.433 165.861 51.360
10 Water (process) ltr 5.388 11.084 3.450
11 Water (cooling) ltr 214.438 442.224 136.916
12 Waste, non-haz./ landfill g 99.933 201.630 65.323
13 Waste, hazardous/ incinerated g 2.305 4.284 1.632
Emissions (Air)
14 Greenhouse Gases in GWP100 kg CO2 eq. 3.542 7.282 2.269
15 Ozone Depletion, emissions mg R-11 eq. negligible negligible negligible
16 Acidification, emissions g SO2 eq. 20.870 42.923 13.365
17 Volatile Organic Compounds (VOC) g 31 64 20
18 Persistent Organic Pollutants (POP) ng i-Teq 556 1.131 361
19 Heavy Metals to Air mg Ni eq. 1.540 3.036 1.031
PAHs mg Ni eq. 234 419 172
20 Particulate Matter (PM, dust) g 524 1.016 356
Emissions (Water)
21 Heavy Metals to Water mg Hg/20 571 1.125 382
22 Eutrophication g PO4 4 7 3
23 Persistent Organic Pollutants (POP) ng i-Teq negligible negligible negligible
When comparing the Base Case HPM and HPS luminaires from a total life cycle perspective,
impacts per functional lumen output are substantially higher for HPM luminaires compared to
HPS luminaires (a factor 3 for almost all impact categories).