Final Report Lot 9: Public street lighting - Amper

(compact) lamps with power equal to or greater than 18 W; other general purpose
lamps. This standard does not apply to: ballasts which form an integral part of the
lamp; ballast-lamp circuits with capacitors connected in series; controllable
wire-wound magnetic ballasts; luminaires, which rely on additional optical
performance aspects.
EN 60598-1: Luminaires Part 1 : General requirements and tests
Scope:
This Part 1 specifies general requirements for luminaires, incorporating electric light
sources for operation from supply voltages up to 1 000 V. The requirements and
related tests of this standard cover: classification, marking, mechanical construction
and electrical construction.
EN 60598-2-3: Luminaires –Part 2-3 : Particular requirements –Luminaires for road and
street lighting
Scope:
This part of IEC 60598 specifies requirements for
luminaires for road, street lighting and other public outdoor lighting applications
tunnel lighting
column-integrated luminaires with a minimum total height above normal ground
level of 2,5 m and for use with electrical lighting sources on supply voltages not
exceeding 1 000 V.
EN 50102: Degrees of protection provided by enclosures for electrical equipment
against external mechanical impacts (IK code)
Scope :
This standard refers to the classification of the degrees of protection provided by
enclosures against external mechanical impacts when the rated voltage of the
protected equipment is not greater than 72,5 kV. This standard is only applicable to
enclosures of equipment where the specific standard establishes degrees of protection
of the enclosure against mechanical impacts (expressed in this standard as impacts).
The object of this standard is to give: the definitions for degrees of protection provided
by enclosures of electrical equipment as regards protection of the equipment inside the
enclosure against harmful effects of mechanical impacts; the designations for the
degrees of protection; the requirements for each designation; the tests to be performed
to verify that enclosures meets the requirements of this standard
EN 60529: Degrees of protection provided by enclosures (IP Code)
Scope :
39