naval dockyard, mumbai - Irfc-nausena.nic.in
naval dockyard, mumbai - Irfc-nausena.nic.in
naval dockyard, mumbai - Irfc-nausena.nic.in
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
followed<br />
37 Provision of<br />
material test<br />
certificates for<br />
follow<strong>in</strong>g:<br />
(i) H&R Johnson<br />
anti skid Endura<br />
tiles<br />
(ii) Pa<strong>in</strong>t<br />
3 Break<strong>in</strong>g of old<br />
Tiles and underlay<br />
<strong>in</strong> the<br />
compartment.<br />
IS 13755<br />
TILING<br />
2 3 3<br />
NAVAL DOCKYARD MUMBAI<br />
DOC CODE Q C H 7 4 Q A P 0 3 8<br />
DEPT : MQC ( HULL) C NO 74 ISSUE<br />
NO 02<br />
DATE : 22 APR 09 PAGE 8 OF 9<br />
4 Clean<strong>in</strong>g the surface to<br />
bare metal, surface f<strong>in</strong>ish<br />
to St2 standard.<br />
5 Application of 01 coat of<br />
Epoxy Red Oxide primer<br />
to 25 30 microns DFT<br />
with dry<strong>in</strong>g time of 24 hrs<br />
6 Application of three coats<br />
of coal tar epoxy to 300+<br />
25 microns DFT with <strong>in</strong>ter<br />
coat <strong>in</strong>terval of 24 Hours<br />
7 Dry Film Thickness<br />
measurement<br />
8 Lay<strong>in</strong>g of wire mesh of<br />
dimensions 85X40X1.5<br />
mm and pa<strong>in</strong>t<strong>in</strong>g of wire<br />
mesh with CTE.<br />
9 Tack weld<strong>in</strong>g and<br />
secur<strong>in</strong>g of wire mesh<br />
HITTU<br />
handbook/Swedish<br />
std<br />
2 3 3<br />
No 20/03 2 3 3<br />
As per approved<br />
WLD<br />
2 3 3<br />
3 3<br />
As per SOW 2 3 3<br />
As per SOW 2 3 3<br />
DYT/INCOD/1213/106(a)/PLYCM/MADHURREFIT/420 63/127