Modeling and Multivariate Methods - SAS

582 Visualizing, Optimizing, and Simulating Response Surfaces Chapter 24
Mixture Profiler
Figure 24.31 Scaled Axes to Account for Off-Axis Factors Total
Mixture Profiler Options
The commands under the Mixture Profiler popup menu are explained below.
Ref Labels
Ref Lines
shows or hides the labels on the plot axes.
shows or hides the grid lines on the plot.
Show Points shows or hides the design points on the plot. This feature is only available if there are no
more than three mixture factors.
Show Current Value shows or hides the three-way crosshairs on the plot. The intersection of the
crosshairs represents the current factor values. The Current X values above the plot give the exact
coordinates of the crosshairs.
Show Constraints shows or hides the shading resulting from any constraints on the factors. Those
constraints can be entered in the Lo Limits and Hi Limits columns above the plot, or in the Mixture
Column Property for the factors.
Up Dots shows or hides dotted line corresponding to each contour. The dotted lines show the direction of
increasing response values, so that you get a sense of direction.
Contour Grid
draws contours on the plot at intervals you specify.